一條數據線走過的路

關于數據線，相必大家并不陌生，它幾乎隨處可見。那一條數據線它是走過一怎樣的路來到我們面前呢？這一不為人知的故事，是時候現于人前了。

為了保證數據線在使用過程中的安全性和可靠性，一條數據線它定是走過這些檢測儀器的路。

Everyone is familiar with the data cable phase, it can be seen almost everywhere.How did the data cables come to us? It's time for this unknown story to appear before others.

In order to ensure the safety and reliability of the data cable during use, a data cable must be the way through these testing equipments.

HD-B609B-S電腦控制萬能材料試驗機，專業適用于塑料薄膜、復合材料、軟質包裝材料、塑料軟管、膠粘劑、保護膜、金屬箔、隔膜、無紡布、橡膠、紙張等產品的拉伸、剝離、撕裂、粘合、穿刺力、拔開力等性能測試。是物性試驗、教學研究、質檢等*的檢測設備。

將數據線垂直懸掛于拉力試驗機上固定，尾端懸掛上重物，懸停持續1分鐘時間。若數據線外觀無明顯不&良，接線頭無松動現象，功能良好，搖晃接口端無接觸不&良，檢驗合格。

HD-B609B-S desktop tensile test machine with PLC controller is professionally specialized in plastic film, composite, soft packaging materials, plastic hose, adhesive, protective film, composite cover, diaphragm, non-woven fabric, rubber, paper and other products of tensile, peeling, tear, bonding, puncture force, pull force and other performance tests.It is an indispensable testing equipment for physical testing, teaching research, quality inspection and so on.

Hang the data cable vertically on the tensile testing machine to fix it, and hang a heavy object on the tail end, and the hovering lasts for 1 minute. If there is no obvious defect in the appearance of the data cable, no loosening of the connection head, good function, and no bad contact when shaking the interface end, it means the inspection is qualified.

HD-E702可程式恒溫恒濕試驗箱可提供較寬的溫度和濕度控制范圍。它用于模擬惡劣的高溫，低溫或潮濕的熱環境?？蛻艨梢愿鶕?jù)性能和測試區域容量選擇合適的模型。

它被廣泛用于各種行業，例如電子儀器儀表，新材料，電工，車輛，金屬，電子產品，航空航天材料，這些在運輸，存儲和使用過程中可能會遇到環境條件。

將數據線放置于試驗箱中8個小時，然后在正常氣候條件下恢復2小時。若外觀無異常，數據線端子無腐蝕，檢驗合格。

HD-E702 constant temperature and humidity chamber provides a wide temperature and humidity control range.It is using to simulate severe high temperature, low temperature or damp heat environment. Customer can select suitable models based on performance and test area capacity. 

It is widely used in various industries, such as electronic instruments and meters, new materials, electricians, vehicles, metals, electronic products, aerospace materials , which may encounter environmental condition during transportation, storage, and in-using.

Place the data cable in a test chamberfor 8 hours, and then restore it for 2 hours under normal weather conditions. If there is no abnormal appearanceandthe data cable terminal is not corroded, it means the inspection is qualified.

HD-E808采用鹽霧腐蝕的方式來檢測被測樣品耐腐蝕的可靠性，是人工氣候環境“三防”（濕熱、鹽霧、霉菌）試驗設備之一，是研究機械、國防工業、輕工電子、儀表等行業各種環境適應性和可靠性的一種重要試驗設備。

將數據線放于試驗箱中24 個小時。試驗完成后取出試件，盡快用清水洗去粘附的鹽粒，用毛刷或海綿除去其它腐蝕生成物，使用不含油霧的壓縮空氣吹干試件，并在常溫下回溫24h。若數據線端子無腐蝕，檢驗合格。

HD-E808 adopts salt spray corrosion method to detect the reliability of the corrosion resistance of the tested sample. One of the test equipment (humid heat, salt spray, mold) is an important test equipment for studying the adaptability and reliability of various environments in the machinery, defense industry, light industry and electronics, instrumentation and other industries.

Put the data cable in the test chamber for 24 hours. After the test is completed, take out the test piece, wash off the adhering salt particles with clean water as soon as possible, remove other corrosion products with a brush or sponge, blow dry the test piece with compressed air without oil mist, and return to temperature at room temperature for 24 hours. If the data cable terminal is not corroded, the inspection is qualified. If the data cable terminal is not corroded, it means the inspection is qualified.